| | |  | Manifolds/Gauges | Home » » Supco VG64 Digital Vacuum Gauge | | | | | | | Description: | | Supco Digital Vacuum Gauge VG64 Vacuum Gauge Gauges And Electronics Digital Vacuum Gauge Range 0 To 12 000 Microns 4 1/2 Digit LCD Accuracy +/-10 | | | Product Details: | | | Product Weight:
| 0.25 pounds | | Package Length:
| 9.2 inches | | Package Width:
| 4.0 inches | | Package Height:
| 1.9 inches | | Package Weight:
| 0.55 pounds | | Average Customer Rating:
|  based on 7 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 7 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
7 of 7 found the following review helpful:
 POS micron gaugeMay 01, 2012
By Bailey
I picked a Supco micron gauge from a local HVAC supply house after my Yellow Jacket stopped working (YJ was about 5-6 years old). after doing a triple vacuum i could get the gauge down to about 450 microns, but as soon as i valved off the vaccum pump the Supco would slowly rise to 12000 mircons, i assumed i had a leak so i pressure tested again 500psi 24hrs with no drop, i changed the oil in my vacuum pump and tried again, still the same thing. i tried hooking the Supco to a new 36" heavy dudy hose and still getting the samething, i returned the gauge and was told the fitting inside the gauge was leaking from the store rep. He replaced that one, the replacement one worked for about 3 weeks (about 10-12 jobs), now it reads 1750 microns with nothing hooked to it, tried cleaning the sensor per the book, still the same thing, what a waste of $90.
4 of 4 found the following review helpful:
Very DisappointedMay 30, 2012
By mike
I ordered this Supco VG64 through Amazon, getting ready for the summer season. I didn't have a need to use it for a couple months. The good is that it does show vacuum (I assume accurately). But the third time I used it I found as soon as you valve off the vacuum pump, the microns slowly start to rise beyond 1200 microns. I connected it directly to my vacuum pump using a DV-29 micron gauge blank off kit and the same thing happens. I cleaned it as directed but that didn't change a thing. This is worse tool I have ever owned what a piece of junk. I should have ordered another Yellow Jacket gauge.
4 of 4 found the following review helpful:
Poor quality.Apr 28, 2012
By Edward
I got this gauge and only used less than 10 times, then it broke down. I can not understand a item with such high price has so bad quality!
3 of 3 found the following review helpful:
 Good for one time use?Aug 26, 2012
By T. Berry
I purchased my first one, about 30 some odd days later it failed. I purchased another, and 36 days later it also has failed.
Both give horribly inaccurate readings.
I thought the first was a possible fluke, but given my experience with 2 failures and the other reviews, I would not purchase another.
The price is too good to be true - you do, in fact, get what you pay for.
1 of 1 found the following review helpful:
IFFY INSTRUMENTSep 21, 2012
By MAC
IT WORKED GOOD[I ASUME ACCURATELY] FOR 2 JOBS.IT EATS BATTERIES AT 4 BUCKS A POP FOR A GOOD 9V BATTERY.THEN IT SHOEWD I COULDNT PULL DOWN BELOW 800 MICRON.BOUGHT A NEW PUMP AND NOW READS DOWN TO 300.CLEANED SENSOR,ANOTHER BATTERY,AND GOT IT DOWN TO 90.BOUGHT A JB GUAGE AND DOWN TO 17 MICRON.I SENT THIS BACK FOR A REFUND AND DIDNT NEED THE 400 DOLLAR PUMP.BUT I NOW HAVE A SPARE BECAUSE OF THIS IFFY GUAGE.AND 140 BUCKS AINT A CHEAPIE,BUT I BELIEVE THESE ARE.IT DOSNT SAY MADE IN CHINA,HOWEVER IT DOSNT SAY MADE IN USA EITHER.ANYWHERE!
See all 7 customer reviews on Amazon.com
| | |
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. |
