Professional Formula - For Small Systems 230 btuh/.067KW systems up to 18,000 btuh/5.3 KW For professional use only: Always wear safety glasses and protective gloves Do not use on mobile systems, ask for Super Seal Premium or Super Seal Pro Use in compliance with the Montreal Protocol and Regional or Federal laws for the handling of refrigerant.
Average Customer Review:
( 1 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
1 of 2 found the following review helpful:
Used as a Preventative MeasureMay 18, 2012
By Edward Prokop Added this Can to one of my smaller units. You will have to be patient to have the whole can empty into the system. Took about 1/2 hr to fully empty. I put it into an R22 system that was 9 years old and needed Freon. After adding the correct amount of R22 to the system and checking the pressures that they were correct for the ambient air temperature, I added the product. It had a slightly exotherm (produced heat in the can) during emptying and mixing with the Freon. The stuff is supposed to just circulate in your unit until there is a leak in the system. It them polymerizes at the leak sight and seals the leak. The can has a moisture capture component along with the sealer. So if you have any trace of moisture in the system, it should get rid of it. I hope it works after extended time and seals any leaky Schrader valve O-rings or micro leaks in the copper line set and evaporator/condenser coils. Will write up more about it if I have a problem and it doesn't work as advertised.
* Estimated shipping rate for US 48 states. Final rate calculated at checkout.